Safety Instructions
Please read this safety instructions before you use the product to prevent injury to yourself and others and to prevent property damage.
The term ‘product’ in this manual refers to the product and any items provided with the product.
Compliance Information
Used to indicate warning information that could lead to serious injury or death if violated while using the product.
Used to indicate caution information that may result in minor injury or product damage if violated while using the product.
Used to provide notes or additional information while using the product.
Note
Used to provide notes or additional information while using the product.
Warning
Install
Be especially careful of miswiring when using high-capacity power supplies.
- Serious fires, electric shocks, or product damage may occur due to miswiring.
Do not allow users to install or repair the product arbitrarily.
-
Causes fire, electric shock, or injury.
-
No free repair service will be provided if the product is damaged due to arbitrary installation or repair by the user.
Do not install the product in places exposed to direct sunlight, moisture, dust, or soot, or where gas may leak.
- May cause fire or electric shock.
When installing the product outdoors, make sure to install it in a shaded and well-ventilated area.
Do not use a completely sealed enclosure when installing the product outdoors.
- The internal temperature of the enclosure may rise due to direct sunlight, causing fire, electric shock, or product damage.
Do not install the product in places where heat is generated, such as near heaters.
- May cause fire or electric shock due to overheating.
Do not install in damp places.
- May cause electric shock or product damage due to moisture.
Do not install in places with electromagnetic interference.
- May cause electric shock or product damage.
Usage
Do not allow liquids such as water, beverages, or chemicals to enter the product.
- May cause fire, electric shock, or product damage.
Do not use damaged power adapters or plugs, or loose outlets.
- If connections are unstable, may cause fire or electric shock.
Do not bend or break the power cord excessively.
- May cause fire or electric shock.
Caution
Install
Read this manual carefully before installing the product to ensure safe and correct installation.
When wiring power cables and connectors, make sure to turn off the power to all devices you are connecting before wiring and connecting.
- Devices may malfunction.
Before connecting the power to the product, check the manual again to ensure that wiring is correct, then connect the power.
Do not install the product in places directly exposed to sunlight or ultraviolet light.
- May cause product damage, malfunction, discoloration, or deformation.
Do not leave power cables in passageways.
- May cause bodily injury or product damage.
Do not install near strong magnetic objects such as magnets, TVs, CRT monitors, or speakers.
- The device may malfunction.
When installing the product on a wall, do not seal around the product with silicone or similar materials.
- The device may malfunction.
When installing multiple devices, ensure the minimum spacing distance is observed.
- May affect the RF and BLE performance of other devices, causing them to malfunction.
Use a power adapter that has IEC/EN 62368-1 approval and is rated above the power consumption of the terminal device. It is recommended to use the power adapters sold by Suprema.
-
Using an unsuitable power supply may cause devices to malfunction.
-
Refer to the Power in the product specifications for maximum current consumption specifications.
Ensure that the product and Secure I/O 2, electric lock (electronic locking device) use separate power supplies.
- Devices may malfunction.
It is recommended to use an enclosure when installed outdoors with full exposure.
- Decreased waterproof and dustproof performance may cause malfunction.
Usage
Do not drop or subject the product to shock.
- The device may malfunction.
Ensure the power supply is not interrupted during firmware upgrades of the product.
- The device may malfunction.
Manage the password so others do not know it, and change it regularly.
- This may lead to unauthorized access.
Do not press the product's buttons (touchpad) forcefully or use sharp tools to press them.
- The device may malfunction.
Use the product within -20 °C ~ 50 °C (BLN2-PAB: -10 °C ~ 50 °C) and store it at appropriate temperatures, not too low or too high.
- The device may malfunction.
Be careful when cleaning the product.
-
Gently wipe the product surface with a clean, dry cloth.
-
If disinfecting the product, dampen a clean cloth with a suitable amount of disinfectant alcohol and gently wipe the product surface. Use disinfectant alcohol that contains 70-75% isopropyl alcohol and a clean, lint-free soft cloth.
-
Do not spray disinfectant directly onto the product.
Do not use the product for purposes other than its intended use.
- The device may malfunction.
RTC Battery
Replacing with unauthorized or incorrect types of batteries may pose a risk of explosion. Dispose of batteries according to local or international waste regulations.