Product Specifications

Provides key specifications of the product, including size, features, and performance.

Credentials

Biometric

Face

• Authentication Distance:

  0.3 ~ 1.0 m

• Authentication Height:

  1.4 ~ 1.9 m

• Matching Speed:

  Within 0.2 seconds

• Live Face Detection: Supported

RF Card

BS3-DB

125kHz EM & 13.56MHz MIFARE, MIFARE Plus, DESFire, DESFire EV1/EV2/EV3, FeliCa

BS3-APWB

125kHz EM, HID Prox & 13.56MHz MIFARE, MIFARE Plus, DESFire, DESFire EV1/EV2/EV3, FeliCa, iCLASS SE/SR/Seos

RF Read Range

EM/HID Prox/MIFARE/DESFire/HID iCLASS: 30 mm, FeliCa: 15 mm

Mobile

NFC, BLE

Scramble Keypad (PIN)

Supported

QR/Barcode

Supported

General

CPU

1.5 GHz Quad Core

Memory

32 GB Flash + 4 GB RAM

Crypto Chip

Supported

Display

5.5" IPS color LCD

Display Resolution

720 x 1280 pixels

Sound

16 bit

Operating Temperature

-20 °C ~ 50 °C

Storage Temperature

-40 °C ~ 70 °C

Operating Humidity

0 % ~ 80 %, non-condensing

Storage Humidity

0 % ~ 90 %, non-condensing

Camera

• IR: 2M pixels
• Visual: 2M pixels

IP Rating

An international rating system that defines the degree of product protection against solids and liquids.

IP65

IK Rating

An international rating system that defines the degree of product protection against physical impacts.

IK06

Authentication

CE, UKCA, KC, FCC, IC, RCM, BIS, SIG, RoHS, REACH, WEEE, MIC, TELEC

Capacity

Max. User

100,000

Max. Credentials (1:N)

Face: 50,000

Max. Credentials (1:1)

• Face: 100,000
• Card: 100,000
• PIN: 100,000

Max. Text logs

5,000,000

Max. Image logs

50,000

Interface

Ethernet

Supported (10/100/1000 Mbps, auto MDI/MDI-X)

Wi-Fi

BS3-DB

Not supported

BS3-APWB

Supported (802.11 b/ g/ n 2.4 GHz)

Network Protocol

TCP, UDP

RS-485

1 ch Master / Slave (Selectable)

RS-485 Communication Protocol

OSDP V2 compliant

Wiegand

1 ch Input, 1 ch Output

Input

3 ch Inputs

Relay

1 relay

PoE+

BS3-DB

Not supported

BS3-APWB

Supported (IEEE 802.3at compliant)

Intercom

Supported

RTSP

Supported

USB

USB 2.0 (Host)

USB Expansion Port

Supported

Tamper

Supported

Electrical

Power

12 Vdc

Current: Max. 1 A

24 Vdc

Current: Max. 0.7 A

Switch Input VIH

• Min.: 3 V
• Max.: 5 V

Switch Input VIL

Max.: 1 V

Switch Pull-up Resistance

4.7 kΩ (The input ports are pulled up with 4.7 kΩ.)

Wiegand Output VOH

More than 4.8 V

Wiegand Output VOL

Less than 0.2 V

Wiegand Output Pull-up Resistance

Internally pulled up with 1 kΩ

Relay

• 2 A @ 30 VDC Resistive load
• 1 A @ 30 VDC Inductive load

Dimensions and Weight

---

1) The minimum facial authentication distance indicated is the default setting for the product, and the recommended facial authentication distance is 0.6-1.0 m.

2) RF read range will vary depending on installation environment.

3) Supports QR/Barcodes composed of up to 32 ASCII code strings.

4) Requires a separate license.

5) Based on users registered without credentials.

6) Requires PoE+ (IEEE 802.3at, 30 W) or PoE++ (IEEE 802.3bt, 60~100 W) power. Standard PoE (IEEE 802.3af, 15.4 W) is not supported. Using standard PoE may cause devices to operate unstably or be permanently damaged. Before connecting the device, make sure your network switch or PoE injector supports PoE+ or PoE++.

Info

• Product specifications are subject to change without notice for performance improvement.

• When this product is a master device, connecting a device with a fingerprint sensor as a slave allows authentication of fingerprints using the slave device.

  • Max. Fingerprint Credentials (1:N): 100,000

  • Max. Fingerprint Credentials (1:1): 100,000