Getting Started

Suprema Device Manager is a mobile application that allows configuration of Suprema's XPass D2, XPass 2, and BioEntry W3 using BLE communication.

Administrators can connect to the server from a PC or set the device's network, server, RS-485 communication, card format, keypad settings, PIN, LED, and buzzer from a mobile device without physically disconnecting it, and can also use functions such as device restart, firmware upgrade, and device setting initialization.

For XPass D2, values set once can be saved as a template for quick and easy application to multiple devices.

Info

Using Suprema Device Manager allows on-site modification of the settings of XPass D2 configured with third-party controllers.

Minimum requirements

Mobile Device

Check if the mobile device supports BLE communication.

• Android 5.0 Lollipop or later

• iOS 9.0 or later

Device and Firmware

Check compatible devices and firmware versions.

• XPass D2 firmware version 1.1.0 or later

• XPass 2

  • XP2-MDPB, XP2-GDPB, XP2-GKDPB: firmware version 1.0.0 or later

  • XP2-MAPB: firmware version 1.4.1 or later

  • XP2-MAPB-H: firmware version 1.4.3 or later

• BioEntry W3 firmware version 1.0.1 or later

Info

• Compatible devices and firmware are subject to change.

• If the device firmware version is lower than the versions listed above, upgrade the device firmware in BioStar X. When using the device as a slave, the connected master's firmware must also be the latest version compatible with BioStar 2 2.7.0 or later.

• For more information about upgrading device firmware, please refer to IP Device (Upgrade device firmware), XPass D2 (Upgrade device firmware), or the BioStar X Administrator Guide.