Configure the Camera
After installing the camera, configure it for the installation environment and intended use. This section explains settings for video quality, privacy, time, network, and integration with external devices and systems. Select the required settings below.
Configure Video Profile
Describes how to manage, from an operational perspective, per-channel view modes and stream encoding settings, and mirror and reset policies.
Configure Camera Settings
This guide explains how to set image quality, white balance, sensitivity, backlight compensation WDR, anti-flicker, IR auto switch, Adaptive AE mode, and the heater to suit the installation environment. It also explains how to specify the installation type.
Configure Privacy & Overlay Settings
Shows how to mask sensitive areas, automatically blur faces, and display date/time and the camera name on video.
Configure Date and Time
Guide to setting the time zone and keeping accurate time using manual entry or an NTP server.
Configure Network Settings
This section explains how to set the IPv4 address and port. Configure an ONVIF profile for NVR/VMS connections. Connect to the CLUe cloud service for user synchronization. Set external access with Cloudflare Tunnel.
Set Up RS-485
Operate the camera as an RS-485 master. Find and add Suprema I/O slave devices, then manage device names and firmware, or remove devices.
Integrate RTSP and ONVIF
This guide explains how to integrate with third-party NVR/VMS through RTSP streaming access URL rules and the ONVIF protocol.