Installing the Hardware

This is a hardware installation and setup guide for configuring the BioStar Air system correctly. These documents explain how to connect and configure each device, including SIP intercoms, IP cameras, QR scanners, and Airfop Patch, as well as how to set up network ports and security module settings.

---

📄️ Configure SIP Intercom for BioStation 3

Learn how to configure the SIP intercom feature on BioStation 3 for two-way audio calls, remote door control via DTMF commands, and call reception through the BioStar Air web and mobile apps.

📄️ IP Camera Support and Setup

Set up ONVIF-compatible IP cameras in BioStar Air, configure live and recorded video streams, and integrate camera footage with access events.

📄️ Install Airfob Patch

This guide explains how to install Airfob Patch.

📄️ Configure SIO2 Secure Module

This guide explains how to configure the SIO2 secure module to enhance access control system security.

📄️ Wiring and Configuring the E200 QR Scanner

Wire and configure BioStar Air devices for optimal performance.

📄️ Identify Network Ports and Devices

Set network ports for BioStar Air-compatible devices and check MAC addresses.