Skip to main content

Device License

Activate the Device License issued by Suprema to use specific features associated with the license.

Device License can activate the device license using BioStar X and a USB memory stick.

Info

  • Contact the place of purchase to issue a device license.

  • One feature is available per device license.

  • You can include multiple device licenses in one device license file. (Supports up to 100)

  • The device license file is an encrypted file and cannot be modified arbitrarily.

  • Device licenses are issued based on device ID. If the device ID is changed in an unusual way, the warranty service for the license is not provided.

Before start​

Before activating the device license, check the following.

  • Prepare a valid device license file. Contact the place of purchase for the device license file.

  • Ensure the target device is registered in BioStar X. For more information about device enrollment, refer to the following.

Apply device license​

  1. Click Settings on the Launcher page.

  2. Click License → Device License in the left sidebar.

  3. Click Browse.

  4. Load the device license file from the path where the device license is saved.

  5. The information corresponding to the loaded license appears in License Type, Device Count, Device List.

  6. Check Device List, and to activate the device license, click the Activate button.

Info

If license activation fails, an error message will appear. Try to activate the license again.

Device license information​

When you load the device license file, the following information appears.

  • License Type: Check the type of license included in the device license file.

    • Camera QR

      Devices that can use Camera QR are as follows.

      • X-Station 2 (XS2-ODPB, XS2-OAPB, XS2-DPB, XS2-APB) firmware version 1.2.0 or higher

      • BioStation 3 (BS3-DB, BS3-APWB) firmware version 1.1.0 or higher

    • Wireless Door Lock

      • Supported OSDP antenna and wireless door lock are as below:

        • U&Z OSDP Antenna: CX8936

        • U&Z Wireless Door Lock: CX217x (Handle), CX212x (Knob)

      • You can issue a device license for up to 12 devices, equal to the number of wireless door locks you want to connect.

      • The maximum number of wireless door locks that can be connected with a device license is 12. Even if you activate multiple device licenses, you cannot exceed 12 devices.

  • Device Count: Check the number of devices included in the device license file.

  • License Count: Check the number of Wireless Door Locks that can be activated with a device license.

  • Device List: You can check detailed information of the devices included in the device license file.

    • Device ID: This is the unique ID that identifies the device.

    • Device Name: This is the name of the device.

    • Product Name: This is the model name of the device.

    • Device Status: This is the current status of the device. Only devices in Normal state can activate licenses.

      • Normal, Disconnected, Not Supported, Unregistered

      If the device is a model that does not support the license feature or if the firmware version is low, Device Status will be displayed as Not Supported. Check the supported models and firmware versions for that feature.

    • License Status: This indicates whether the license is activated. Only Not Activated devices can activate licenses.

      • Not Activated, Activated, N/A

    • Activated Count: This shows the connection status of the wireless door lock.

Info
  • Values for License Count, Activated Count will only appear when the wireless door lock device license is loaded.
Was this page helpful?