Version 2.8.0 (V2.8.0.6)

Release|2021-06-07

New Features

• Supports X-Station 2

• Supports Intelligent Slave Feature (FW upgrade is required)

• Supports getting Face Image Warping (FaceStation F2 only)

• Supports the function of Device Capabilities to know the connected device capability

• Adds the relevant log events of Mobile Card Verification

• Adds new model names to check card supporting

1. X-Station 2 Configurations are available to use.

   • Refer to structure BS2BarcodeConfig

   • Refer to API BS2_GetBarcodeConfig

   • Refer to API BS2_SetBarcodeConfig

   • Refer to API BS2_WriteQRCode

2. The relevant function of Intelligent Slave is available to use. Intelligent Slave is a function that enables many users' 1:1 or 1:N matching by transmitting the authentication result to OSDP card data when authentication using biometrics is performed in an environment in which the Suprema biometric device and a third-party controller are connected.

   For more information on Intelligent Slave, see Support site.

   • Refer to structure BS2Rs485Config

   • Refer to API BS2_GetRs485Config

   • Refer to API BS2_SetRs485Config

3. Getting Image Warping from the raw image file of user face is available to use.

   • Refer to API BS2_GetNormalizedImageFaceEx

4. Getting Device Capacity Information has been added.

   • Refer to structure BS2DeviceCapabilities

   • Refer to API BS2_GetDeviceCapabilities

5. New log event 'Mobile Card Verification' has been added to distinguish the user credential.

   • Refer to structure BS2Event and refer to the subcode

6. API BS2_GetCardModel has been added to support the below model names.

   • Refer to API BS2_GetCardModel

   • BEW2-ODPB

   • BEW2-OAPB

   • BEW2-OHPB

Modified Features

1. Fixed the error BS_SDK_ERROR_TIMEOUT where the below case.

   RS485 Master: CoreStation 40

   RS485 Slave: FaceStation 2 / FaceLite

   Assigning a face template for FaceStation 2 or FaceLite to a user and enrolling it on CoreStation 40.

   • Refer to API BS2_EnrolUser

   • Refer to API BS2_EnrollUser

   • Refer to API BS2_EnrolUserEx

   • Refer to API BS2_EnrollUserEx

   • Refer to API BS2_EnrollUserSmall

   • Refer to API BS2_EnrollUserSmallEx

   • Refer to API BS2_EnrollUserFaceEx

2. Fixed the issue that device transfers for more than 700 users were relatively slow compared to V2.7.2.x and earlier.

   • Refer to API BS2_EnrolUser

   • Refer to API BS2_EnrollUser

   • Refer to API BS2_EnrolUserEx

   • Refer to API BS2_EnrollUserEx

   • Refer to API BS2_EnrollUserSmall

   • Refer to API BS2_EnrollUserSmallEx

   • Refer to API BS2_EnrollUserFaceEx

3. Fixed the return value from BS_SDK_SUCCESS to BS_SDK_ERROR_NOT_SUPPORTED when requesting Config from FaceLite that does not support Event config.

   • Refer to API BS2_GetEventConfig

4. Fixed the issue that the SDK allocation and release were repeated, making device connection impossible if a certain number of times were exceeded.

   • Refer to API BS2_AllocateContext

   • Refer to API BS2_ReleaseContext

5. Fixed the issue that calling BS2_ReleaseContext cannot release the resource intermittently and the port 51212/port 51213 occupied.

6. Fixed the issue that a deadlock could occur during event processing due to repeated connecting device/disconnecting device calls.

7. Fixed the issue that the application may crash intermittently during calling BS2_ReleaseContext.

8. Fixed the issue that the device could be reset if the fields of timeout were not assigned a multiple of 10 when updating the display settings.

   • Refer to structure BS2DisplayConfig menuTimeout, msgTimeout, backlightTimeout

   • Refer to API BS2_SetDisplayConfig

9. Fixed the issue that CPU Usages goes up to 99% when BS2_SearchDevices is called repeatedly in a 4-core environment.

10. Added 'Not used' to the White LED Settings for FaceStation F2.

11. FaceStation F2 Only The meaning and setting values of lightCondition in the BS2FaceConfig have been changed as follows.

    Supported Ver.	Meaning	0	1	2	3
    1.0.0 ~ 1.0.5	Ambient Brightness	Indoor	Outdoor	Auto	-
    1.1.0 or higher	Light Brightness	Normal	High	- ([Deprecated])	Not used

    • Refer to structure BS2FaceConfig lightCondition