Ir al contenido principal

XPass 2 Air Firmware

Firmware Version 2.11.2 (Build No. 2.11.2_260112)​

Release|2025-01-12

This release enhances user synchronization for BioStar Air environments, aligns device behavior with Suprema firmware standards, and improves network configuration stability.

Key Features and Improvements​

Authentication​

  1. Supports authentication using users and access levels stored locally on the device.

  2. Server-based authentication is not supported in this version and is not required for normal operation.

User Management​

  1. Added user synchronization capability.

  2. Users and access levels are stored directly on the device through synchronization.

System and Firmware Behavior​

  1. Firmware is based on Suprema XPass 2 base firmware v1.5.0.

  2. Device behavior, including LED indicators, is aligned with standard Suprema firmware.

    LED indicators

    ColorDescription
    GreenAuthentication success
    RedAuthentication failure
    Blue/Cyan blinkingNormal operation
    Blue/Green blinkingNetwork initialization in progress
    Green blinkingWaiting for input
    Green/White blinkingConnecting to Suprema Pass (BLE)
    White blinkingConnecting to Device Manager

  3. Legacy Airfob Space-specific LED indicators have been removed

Compatibility and Migration​

  1. Compatible with BioStar 2 environments.

  2. Firmware upgrade is supported from v2.9.0 and earlier to v2.11.2.

    • Downgrade to earlier versions (e.g., v2.9.0, v2.8.1) is not supported.

Firmware Transition Notes​

  1. Devices can transition between Suprema firmware v1.5.0 and AIR v2.11.2.

    • Legacy models (AEM, AE-MC, AE-MU) are not supported when upgrading to Suprema firmware and may become unusable.

      These models must remain on BioStar Air firmware v2.9.0 or earlier.

Bug Fixes​

Network​

  1. Fixed an issue where device network settings were unintentionally changed when using a static IP.

Firmware Version 2.8.1 (Build No. 2.8.1_250408)​

Release|2025-04-14

Initial Firmware Developed​

Firmware Version 2.8.0 (Build No. 2.8.0_250115)​

Release|2025-01-15

This release introduces a new Event Logs feature, improves device configuration behavior, and resolves known issues.

Key Features and Improvements​

Common​

  1. Added Event Logs feature to monitor the following situations:

    • Door forced open

    • Door held open

  2. Improved automatic setting of device timezone to site timezone during device registration via mobile app.

  3. Improved local storage of event logs when mobile connection is unavailable.

  4. Improved tamper status On/Off reporting issues.

Bug Fixes​

Airfob Edge Reader Mullion-Specific Fixes​

  1. Fixed an issue where the sound was not played when opening the door with LinkPass credentials if the warning sound was set to short.

  2. Fixed an issue where time errors occurred on the device when disabling Daylight Saving Time (DST) configuration.

Firmware Version 2.5.1 (Build No. 2.5.1_241025)​

Release|2024-10-25

This release focuses on stability improvements and device diagnostics.

Key Features and Improvements​

  1. Added eMMC lifespan monitoring and upload to server.

  2. Removed retry limit for network API errors.

  3. Increased API timeout to 10 seconds.

Firmware Version 2.4.1 (Build No. 2.4.1_240708)​

Release|2024-07-08

Key Features and Improvements​

  1. Improved firmware upgrade dependency requirements.

    • Removed the requirement to upgrade to v2.3.1 before installing v2.4.0.

    • Supports direct upgrade to v2.4.1 from the following versions:

      • v2.0.x

      • v2.1.x

      • v2.2.x

      • v2.3.x

Firmware Version 2.4.0 (Build No. 2.4.0_240603)​

Release|2024-06-03

This release introduces new authentication features and improves system behavior during initialization and API processing.

Key Features and Improvements​

  1. Added video gateway functionality.

  2. Supports user authentication by entering RFID card values through the XPass 2 keypad.

    Example: 123456789# → Authenticate / * → Cancel input

  3. Improved API error counting to only count actual API response errors, not timeouts

  4. Improved resetting of device time and language settings during initialization

¿Fue útil esta página?