Firmware Version 1.5.0 (Build No. 1.5.0_260819)

Release|2026-08-19

注意

• If you are using a device with firmware version v1.4.0, you must upgrade to v1.4.1 before use.
  As important security and stability improvements are included, using the latest version after the upgrade is mandatory.

• After upgrading the firmware to v1.4.0, it is not able to downgrade to an earlier version of the firmware.

• For more information, check the serial number of the device and contact the Suprema.

New Features and Improvements

---

1. Supports new device.
   • XPass Q2

2. Added Auth Fail Lockout feature, which locks the device after repeated PIN authentication failures.

3. Added and improved face authentication features
   • Improved face authentication performance
   • Added support for sequential multi-face authentication (device license required)
   • Added support for Anti-Tailgating

4. Supports feature to set the baud rate of slave devices.

5. Improved Master Admin to enforce re-enrollment when fewer than two credentials remain.

6. Improved USB export/import file name handling
   • Changed the file name generated during USB export to start with BioStarX
   • Fixed Files exported from BioStar X not appearing in the import list

7. Improved log display for unsupported events and errors on the device.

8. Changed the authentication success icon color to green.

9. Improved OSDP reader mode to display "Access Denied" when access is denied by a third-party control panel.

10. Improved zone status display and alarm clearing behavior after power restart following a fire alarm.

11. Improved BLE stability.

12. Expanded allowed characters for User ID and User Name
    • Added support for periods (.) in User ID
    • Added support for periods (.) and apostrophes (') in User Name

Bug Fixes

---

1. Suprema Mobile Access authentication failing on iPhones upgraded to iOS 26 or later. 発生バージョン: 1.0.0

2. Manual Lock failing to release after the set time elapses. 発生バージョン: 1.4.0

3. When multiple devices are connected to a third-party control panel, rebooting one device causes the RS-485 connections of the other devices to be disconnected. 発生バージョン: 1.0.2

4. Attendance status not recorded correctly according to the configured schedule times. 発生バージョン: 1.0.0

5. Card authentication not working on slave devices when the master device is downgraded to a version that does not support Secure Messaging. 発生バージョン: 1.4.3

6. An incorrect authentication failure reason is displayed when authenticating with an EV1 card on a slave device with Secure Messaging enabled. 発生バージョン: 1.4.3

7. CSN value being output for EV1 cards on a slave device connected to a third-party controller via OSDP when the Secure Messaging enforcement option is enabled. 発生バージョン: 1.4.3

8. CSN value being transmitted to the Wiegand in device for EV1 cards when the Secure Messaging enforcement option is enabled on a bypass-configured Wiegand device. 発生バージョン: 1.4.3

9. Suprema Mobile Access authentication failing on certain Android devices. 発生バージョン: 1.0.0

10. Devices that do not support the buzzer failing to connect when integrated with an OSDP panel. 発生バージョン: 1.0.0

11. Card authentication failure on connected Wiegand readers. 発生バージョン: 1.0.0

12. Device freezing or rebooting when face authentication occurs while adding or deleting users. 発生バージョン: 1.0.0

13. Device freezing or rebooting and delayed user enrollment during user synchronization. 発生バージョン: 1.0.0